Intall a Camera - Module on the AT91SAM9M10 via ISI

StefanKE · **Joined:** Tue Dec 13, 2011 5:16 pm **Posts:** 4

Hello,

i want to use my "Pytec" Camera-Module Pytec VM-006-BW-xxx SXGA, with the MICRON MT9M001 Camerachip, on my AT91SAM9M10 - G45-EK Board.

Flyer of the Pytec Camera-Module:
http://www.phytec.de/fileadmin/user_upl ... r_engl.pdf

On this page a Omnivision OV2640FSL Camera-Module is used. This Camera should run after booting Android.

http://www.at91.com/android4sam/bin/vie ... ameraUsage

Datasheet of OV2640FSL:
http://www.morninghan.com/pdf/OV2640FSL ... 1_3%29.pdf

I connected my Camera with the same corresponding terminals. After booting Android I started the Camera-App and get the Error-Message:

The application Camera (process com.android.camera) has stopped unexpectedly. Please try again.
"Force close"

Whats wrong?

Thanks a lot.

Processor: SAM9M10
Androdid Version:2.3.5
Kernel version: 2.6.35.7

Embest · **Posted:** Mon Jan 16, 2012 3:45 am

The board with Android didn't support the MICRON MT9M001 Camerachip at now. So the Camera application can not work.

StefanKE · **Joined:** Tue Dec 13, 2011 5:16 pm **Posts:** 4

Is there a list with supported Camera-Modules oder Camera-Chips???

Embest · **Posted:** Tue Jan 17, 2012 5:04 am

The package only support OV2640 Camera module at now.

Intall a Camera - Module on the AT91SAM9M10 via ISI

Who is online