Legacy Linux4SAM material

For SAM9x5 family

Legacy SAM9x5 family special page

Legacy GettingStarted for AT91SAM9x5 family

For SAM9n12 family

Legacy SAM9N12 family special page

Legacy GettingStarted for AT91SAM9N12 family

For other SAM9 SoCs

That includes support for:

  • AT91SAM9260
  • AT91SAM9261
  • AT91SAM9263
  • AT91SAM9XE
  • AT91SAM9RL
  • AT91SAM9G10
  • Old revisions of AT91SAM9G45 family

Legacy GettingStarted

Legacy AT91Bootstrap Page

Legacy U-Boot Page

Legacy Linux Kernel Page

Legacy SAM9M10 Gstreamer Page

Legacy OpenEmbedded / Angstrom Page


Notes

1 : TWI: Two Wires Interface is an I2C compatible bus

2 : (SAM-BA v2.xx) n % prompt located at the bottom of the SAM-BA window.

3 : *AT91SAM9X5-EK*: common board for every SAM9x5 chip in the family.

4 : *AT91SAM9N12-EK*: common board for every SAM9N1x, SAN9CN1x chip in the family.

5 : !AT91SAM9263 MRLA or MRLB could be soldered on this board revision. To identity which chip revision you have, check AT91SAM9263-EK user guide at http://atmel.com/dyn/products/tools_card.asp?tool_id=4057

6 , 10 : In addition to single slot AT91SAM9G20EK demo files, it contains also demo files for dual SD/MMC slot AT91SAM9G20EK.

  • at91sam9g20ek_demo_linux_<media>.* apply to at91sam9g20ek rev. A and rev. B
  • at91sam9g20ek_2mmc_demo_linux_<media>.* apply to at91sam9g20ek rev. C and onwards

7 , 11 : While used with SAM-BA 2.10 and later, please modify .bat file to specify product name "at91sam9g45-ekes"

8 : While used with SAM-BA 2.10 and later, please modify .bat file to specify product name "at91sam9m10-ekes"

9 : While used with SAM-BA 2.10 and later, please modify .bat file to specify product name "at91sam9m10-g45-ek"

12 : If you experience issues with NAND flash accesses,
please refer to the AT91SAM9263-EK Evaluation Board Rev. B User Guide chapter 1.5 NAND Flash Access Issue

13 : To workaround the issue with SAM-BA access through USB, a ROM code replacement is located in Dataflash. Please refer to the Errata on AT91SAM9G45 Engineering Sample Devices document

14 : Only available on products with embedded Flash

15 , 17 , 23 , 24 , 26 , 27 , 28 , 29 : On board DataFlash chip

16 : Please check at91sam9260 errata # 44.2.1.1

18 , 19 : Supported on SAM9261 rev B onwards

20 : Removable DataFlash card

21 , 22 : Supported on SAM9263 rev B onwards

25 : Supported on SAM9G20 recent rev A, rev B and newer

30 , 31 : Warning, important for at91sam9g45 family: use proper location for RAM: 0x70000000 instead of 0x20000000

32 : at91_mci enhancement with those upstream patches :
- folow flowcharts
- disable handling of blocks with size not multiple of 4 bytes
- bug-in-at91-mci-suspend-routines.patch
- whitespace
- typo
- add multiwrite cap

33 : For AT91SAM9XE chips, there is an additional tiny patch that locates TX Ethernet buffers in internal SRAM : adapt_macb_sam9xe.diff


r11 - 04 Dec 2013 - 14:29:02 - NicolasFerre
 
Linux & Open Source related information for AT91 Smart ARM Microcontrollers

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Atmel® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. This site is powered by the TWiki collaboration platform

ARM® and others are registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.

Ideas, requests, contributions ? Connect to LinksToCommunities page.

Syndicate this siteRSS ATOM