Recent Changes in Linux4SAM Web retrieved at 12:03 (GMT)

You can easily download DT Overlay source code from GitHub DT Overlays repository: clone the Linux4sam GitHub DT Overlay repository $ git clone git://github...
External Component on External Bus Interface Introduction The External Bus Interface is designed to ensure the successful data transfer between several external...
Linux Kernel 4.14 Linux 4.14 for AT91 source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
Configure AT91Bootstrap sama5d3xek Assuming you are at the AT91Bootstrap root directory, you will find a board/sama5d3xek folder which contains several default...
U Boot FAQ How does U Boot auto detect the connected PDA on my board ? A: U Boot uses a specific GPIO pin to read a memory from the connected PDA. More information...
Welcome to 1 Welcome to the main starting point for Linux OS on SAM products. Its aim is to centralize information about Linux kernel and open source projects on...
Using I2SC (Inter IC Sound Controller) Introduction This page explains how to enable and configure I2SC from SAMA5D2 SoCs to an external codec, using MikroElektronika...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
Using ISI (Image Sensor Interface) Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different image sensors. The...
Using ISI (Image Sensor Interface) in Linux4SAM 6.0 and later Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different...
UsingISC (Image Sensor Controller) Introduction This page describes how to configure and use of the ISC in SAMA5D2 SoC with the image sensors. The Image Sensor...
U Boot Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several processors...
PDA detection at boot time Introduction Starting with U boot 2018.07, U boot can autodetect which PDA screen is connected (if any is connected). How it works PDA...
How to manually select (or enforce) the PDA at boot time How it works How to select the PDA at boot time Starting from Linux4SAM6.0 release, we release a single...
ConnectModuleFromPDA Connection Summary There are multiple types of display modules used on the SAMA5D2, SAMA5D3, SAMA5D4 Xplained boards and SAMA5D27 SOM1 EK, TM...
How to patch Device Tree Blob in U boot using Overlays How it works How to patch Device Tree Blob in U boot using Overlays Starting from U boot 2018.07 released...
Using the SAMA5D2 compatible Resistive Touchscreen The SAMA5D2 SoC has the support for Resistive Touchscreen. This feature is embedded in the ADC device. This cannot...
Using FIT image and Device Tree Overlays How it works Using FIT with overlays Since U boot 2018.07, released with linux4sam 6.0, we have the feature of adding Device...
Dedicated page on U Boot wiki: http://www.denx.de/wiki/U Boot/SourceCode You can easily download U Boot source code from GitHub U Boot repository: clone the Linux4sam...
DT Overlay Introduction A device tree overlay is a file that can be used at runtime (by the bootloader in our case) to dynamically modify the device tree, adding...
Linux4SAM Software tools AT91Bootstrap U Boot / barebox Linux Kernel DT Overlay Open source solutions Yocto Project Buildroot OpenWrt Boards...
SAM BA 3 subsections Install SAM BA software in your PC In addition to the official SAM BA pages on http://www.microchip.com, we maintain information about SAM BA...
Connect the SAM BA with USB Install SAM BA software in your PC 172677.700868 usb 2 1.4.4: new full speed USB device number 31 using ehci pci 172677.792677 usb...
How to use SAMA5D2 power management modes Introduction This page describes the way SAMA5D2 power management modes could be used in Linux. Available modes The...
Driver Model in U Boot Introduction Driver model in U Boot is to provide a consistent model for U Boot drivers and the platform data / device tree information used...
OpenEmbedded / Yocto Project / Poky: build from sources How to build Poky for AT91 Note that building an entire distribution is a long process. It also requires...
Software Tools SAM BA (SAM Boot Assistant In system Programmer) can run on: Windows 32 bit and 64 bit Linux x86 and x86 64 (Cf. Tested Linux distributions...
Tips and Tricks Shutdown Wakeup Using Ultra Low Power mode 1 (ULP1) on SAMA5D2 Using the SAMA5D2 (and compatible) ADC device Audio recording with PDMIC GuiSolutions...
Demo archives linux4sam 6.0 Pre built Demo Demo archives linux4sam 5.8 Pre built Demo Demo archives linux4sam 5.7 Pre built Demo Demo archives linux4sam...
How to use record audio stream with PDMIC Introduction The Pulse Density Modulation Interface Controller (PDMIC) is a mono PDM interface controller and decoder that...
Shutdown / Wake Up FAQ Use the Wake Up function on AT91SAM9x5 EK board There are two options to wake up the board: using the WAKE UP button located on...
Boot Logo for SAM SOC`s Introduction This page describes to set a Boot Logo using U boot. U boot Device tree changes. if your using LCD Models TM7000, and http...
Crypto hardware acceleration Introduction This page is mainly about how to use crypto hardware acceleration in OpenSSL.Many internet applications such as OpenSSH...
USB gadget configuration Introduction This page is mainly about how to configure USB Gadget on Linux kernel. Problem statement USB Gadget ConfigFS is an interface...
How to use Pulse Width Modulation driver Introduction This page describes how PWM could be configured, debugged and used on SAMA5D2 devices. Since linux...
UsingMaxTouch Introduction The maXTouch Series features a complete portfolio of high performance single chip controllers designed to address every touchscreen size...
Use of the AT91 ADC driver Introduction This is the description of the Microchip AT91 ADC driver. It is used for SoC based on ARM9 cores and SAMA5D3 and SAMA5D...
How to use the Atmel KMS/DRM LCD driver Introduction Since linux 3.18 at91, the recent Atmel SoCs have a new LCD driver that is based on the Linux KMS/DRM sub system...
Using the SAMA5D2 compatible ADC device Introduction This page describes how to test the features of the SAMA5D2 compatible ADC device. This driver uses the Industrial...
FAQ classification base form of Linux4SAM This is the base form for classification for Linux4SAM. Form Definition Name Type Size Values Tooltip...
Recent update of FAQ This is the recent update of FAQ based on classification defined by WebFaqBaseForm FAQ updates by Boards $ Sama5d27Som1EK: $ Sama5d2PtcEK...
Linux Kernel Ecosystem Kernel Archives is the primary site for the Linux kernel source. All Linux kernel versions, including latest snapshot or `release candidate...
OpenWrt Introduction OpenWrt is an open source project for embedded operating system based on Linux, primarily used on embedded devices to route network traffic...
How to build Buildroot for AT91 Prerequisites Host build system should be a Linux system with software installed. You can install missing packages using yum install...
Linux Kernel 4.9 Linux 4.9 for AT91 source code The Linux kernel for Microchip ARM Based PMUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
Board Template Page Kit Information Kit Overview Access the console Demo Demo archives Play with the demo Build From source code Setup ARM Cross Compiler...
Setup ARM Cross Compiler 4.9.4 Ubuntu: In Ubuntu, you can install the ARM Cross Compiler by doing: sudo apt get install gcc arm linux gnueabi export CROSS...
AT91Bootstrap Introduction AT91Bootstrap is the 2nd level bootloader for Atmel AT91 SoC providing a set of algorithms to manage the hardware initialization such...
SAMA5D27 SOM1 Evaluation Kit SoC Features Recent FAQ
SAMA5D2 PTC EK Board SoC Features Recent FAQ

«Previous   1  2  3  4   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map