Recent update of FAQ

This is the recent update of FAQ based on classification defined by WebFaqBaseForm


FAQ updates by Boards

Sama5d2Xplained

SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
Crypto Config: How to configure Crypto driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Connect Module From PDA: How to connect LCD module from PDA to the Xplained Boards. (Kernel)
Driver Model In UBoot: How to enable U-Boot driver model, using Sama5d2Xplained as an example. (U-Boot)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
PDMICAudio Record: Using the PDMIC to record audio stream. (Kernel, linux-4.1-at91, linux-4.4-at91)
Using SAMA5 D2 ADCDevice: Using the SAMA5D2-compatible ADC device. (Kernel, linux-4.1-at91, linux-4.4-at91)
Using Ultra Low Power Mode 1: Using Ultra Low Power mode 1 (ULP1). (Kernel, linux-4.1-at91, linux-4.4-at91)
Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)
Gui Solutions: Presentation of some GUI solutions. (YoctoProject)
Using Max Touch: Introduction for how to use MaxTouch. (Kernel, linux-3.18-at91, linux-4.1-at91)
Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91)

Sama5d4Xplained

SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
Crypto Config: How to configure Crypto driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Connect Module From PDA: How to connect LCD module from PDA to the Xplained Boards. (Kernel)
Driver Model In UBoot: How to enable U-Boot driver model, using Sama5d2Xplained as an example. (U-Boot)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)
Gui Solutions: Presentation of some GUI solutions. (YoctoProject)
Using Max Touch: Introduction for how to use MaxTouch. (Kernel, linux-3.18-at91, linux-4.1-at91)
Using Isi: How to use the Image Sensor Interface. (Kernel, linux-3.18-at91, linux-4.1-at91)
Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91)
AT91 Bootstrap Debug Eclipse: Debug AT91Bootstrap. (AT91Bootstrap)
Pmecc Configure: About PMECC configuration. ()

Sama5d4ek

SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
Crypto Config: How to configure Crypto driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Driver Model In UBoot: How to enable U-Boot driver model, using Sama5d2Xplained as an example. (U-Boot)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)
Gui Solutions: Presentation of some GUI solutions. (YoctoProject)
Using Max Touch: Introduction for how to use MaxTouch. (Kernel, linux-3.18-at91, linux-4.1-at91)
Using Isi: How to use the Image Sensor Interface. (Kernel, linux-3.18-at91, linux-4.1-at91)
Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91)
AT91 Bootstrap Debug Eclipse: Debug AT91Bootstrap. (AT91Bootstrap)
Pmecc Configure: About PMECC configuration. ()

Sama5d3Xplained

SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
Crypto Config: How to configure Crypto driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Connect Module From PDA: How to connect LCD module from PDA to the Xplained Boards. (Kernel)
Driver Model In UBoot: How to enable U-Boot driver model, using Sama5d2Xplained as an example. (U-Boot)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)
Gui Solutions: Presentation of some GUI solutions. (YoctoProject)
Using Max Touch: Introduction for how to use MaxTouch. (Kernel, linux-3.18-at91, linux-4.1-at91)
Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91)
AT91 Bootstrap Debug Eclipse: Debug AT91Bootstrap. (AT91Bootstrap)
Pmecc Configure: About PMECC configuration. ()

Sama5d3xek

SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
Crypto Config: How to configure Crypto driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Driver Model In UBoot: How to enable U-Boot driver model, using Sama5d2Xplained as an example. (U-Boot)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Kernel, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91)
Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)
Gui Solutions: Presentation of some GUI solutions. (YoctoProject)
Using Max Touch: Introduction for how to use MaxTouch. (Kernel, linux-3.18-at91, linux-4.1-at91)
Using Isi: How to use the Image Sensor Interface. (Kernel, linux-3.18-at91, linux-4.1-at91)
Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91)
Uboot Fit Image: How to use the FIT image. (U-Boot)
AT91 Bootstrap Debug Eclipse: Debug AT91Bootstrap. (AT91Bootstrap)
Pmecc Configure: About PMECC configuration. ()

AT91sam9x5-ek boards

SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
Shutdown Wake Up: Use the Wakeup Feature of the Shutdown Controller.. (Kernel, linux-4.4-at91)
Real Time: Enable Real Time support for AT91SAM9 Soc. (Kernel)
Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)

Older SAM9 boards

Real Time: Enable Real Time support for AT91SAM9 Soc. (Kernel)
Audio Record On At 91sam 9g 20ek: Audio Record on At91sam9g20ek. ()
SAM9 M10 Gstreamer: M10 Vdec support. ()

FAQ updates by Components

AT91Bootstrap

SDCard Boot Notice: How to boot up the board from SD card. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek, AT91sam9x5-ek)
AT91 Bootstrap Debug Eclipse: Debug AT91Bootstrap. (Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)

U-Boot

Driver Model In UBoot: How to enable U-Boot driver model, using Sama5d2Xplained as an example. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Uboot Fit Image: How to use the FIT image. (Sama5d3xek)
U-Boot FAQ: Some U-Boot FAQ entries. ()

Kernel

Crypto Config: How to configure Crypto driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Connect Module From PDA: How to connect LCD module from PDA to the Xplained Boards. (Sama5d2Xplained, Sama5d4Xplained, Sama5d3Xplained)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Shutdown Wake Up: Use the Wakeup Feature of the Shutdown Controller.. (AT91sam9x5-ek)
PDMICAudio Record: Using the PDMIC to record audio stream. (Sama5d2Xplained)
Using SAMA5 D2 ADCDevice: Using the SAMA5D2-compatible ADC device. (Sama5d2Xplained)
Using Ultra Low Power Mode 1: Using Ultra Low Power mode 1 (ULP1). (Sama5d2Xplained)
Real Time: Enable Real Time support for AT91SAM9 Soc. (AT91sam9x5-ek, other AT91SAM9 boards)
Using Max Touch: Introduction for how to use MaxTouch. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Isi: How to use the Image Sensor Interface. (Sama5d4Xplained, Sama5d4ek, Sama5d3xek)
Iio Adc Driver: Adc IIO driver introduction. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)

linux-3.10-at91

Iio Adc Driver: Adc IIO driver introduction. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)

linux-3.18-at91

Crypto Config: How to configure Crypto driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Max Touch: Introduction for how to use MaxTouch. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Isi: How to use the Image Sensor Interface. (Sama5d4Xplained, Sama5d4ek, Sama5d3xek)
Iio Adc Driver: Adc IIO driver introduction. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)

linux-4.1-at91

Crypto Config: How to configure Crypto driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
PDMICAudio Record: Using the PDMIC to record audio stream. (Sama5d2Xplained)
Using SAMA5 D2 ADCDevice: Using the SAMA5D2-compatible ADC device. (Sama5d2Xplained)
Using Ultra Low Power Mode 1: Using Ultra Low Power mode 1 (ULP1). (Sama5d2Xplained)
Using Max Touch: Introduction for how to use MaxTouch. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Isi: How to use the Image Sensor Interface. (Sama5d4Xplained, Sama5d4ek, Sama5d3xek)
Iio Adc Driver: Adc IIO driver introduction. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)

linux-4.4-at91

Crypto Config: How to configure Crypto driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Using Atmel DRMDriver: Using Atmel KMS/DRM LCD driver. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)
Shutdown Wake Up: Use the Wakeup Feature of the Shutdown Controller.. (AT91sam9x5-ek)
PDMICAudio Record: Using the PDMIC to record audio stream. (Sama5d2Xplained)
Using SAMA5 D2 ADCDevice: Using the SAMA5D2-compatible ADC device. (Sama5d2Xplained)
Using Ultra Low Power Mode 1: Using Ultra Low Power mode 1 (ULP1). (Sama5d2Xplained)

BuildRoot

YoctoProject

Yocto Project FAQ: Some Yocto Project FAQ entries. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek, AT91sam9x5-ek)
Gui Solutions: Presentation of some GUI solutions. (Sama5d2Xplained, Sama5d4Xplained, Sama5d4ek, Sama5d3Xplained, Sama5d3xek)

r8 - 09 Sep 2016 - 08:23:36 - NicolasFerre
 
Linux & Open Source related information for AT91 Smart ARM Microcontrollers

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Atmel® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. This site is powered by the TWiki collaboration platform

ARM® and others are registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.

Ideas, requests, contributions ? Connect to LinksToCommunities page.

Syndicate this siteRSS ATOM