Results from Linux4SAM web retrieved at 09:38 (GMT)

AT91Bootstrap Introduction AT91Bootstrap is the 2nd level bootloader for Atmel AT91 SoC providing a set of algorithms to manage the hardware initialization such...
AT91Bootstrap Debugging with Eclipse for Linux Introduction The Eclipse has become the de facto industry standard environment host for embedded development. The...
Configure AT91Bootstrap sama5d3xek Assuming you are at the AT91Bootstrap root directory, you will find a board/sama5d3xek folder which contains several default...
AT91SAM9260 EK SAM BA Recovery Reference documentation SAM BA Recovery application note. You also have a brief AT91SAM9260 EK Bootstrap Recovery Procedure...
AT91SAM9x5 EK Board SoC Features Recent FAQ
FAQ about audio Why there no sound when playing an audio file? A: The sound controlling devices are muted by default. You need to unmute them explicitly. Using...
Audio Recording on AT91SAM9G20EK Introduction This page is a starting point to add recording functions to the AT91SAM9G20EK board (using Wolfson 8731). It contains...
Barebox Introduction Barebox (formerly known as u boot v2) is a bootloader that inherits the best of U Boot and the Linux kernel: The size and look and feel...
Boot Logo for SAM SOC`s Introduction This page describes to set a Boot Logo using U boot. U boot Device tree changes. if your using LCD Models TM7000, and http...
Build QT Demo for AT91SAM9N12 EK Introduction OpenEmbedded is a powerful building environment. OpenEmbedded has good support for porting Nokia QT to various...
Buildroot Introduction Buildroot is `a simple, efficient and easy to use tool to generate embedded Linux systems through cross compilation` It uses the Linux...
How to build Buildroot for AT91 Prerequisites Host build system should be a Linux system with software installed. You can install missing packages using yum install...
Buildroot FAQ What are the prerequisites to use jffs2 root filesystem? A: You should enable the following kernel config Memory Technology Device (MTD) support...
Get Buildroot Root filesystem pre built images The root filesystem images are jffs2 or ubi filesystem images containing an entire embedded Linux system....
BuildRoot : use the demo root filesystem Flash the rootfs image Note that the root file system is installed at offset 0x800000 in the nand flash. From a Linux...
build BuildRoot for AT91SAM9x5 family Introduction Buildroot is used to build the cross tool chain, a small root filesystem image of different types (jffs2,...
Build BuildRoot for AT91SAM9N12 EK Introduction Buildroot is used to build the cross tool chain, a small root filesystem image of different types (jffs2, tar...
ConnectModuleFromPDA Connection Summary There are multiple types of display modules used on the SAMA5D2, SAMA5D3, SAMA5D4 Xplained boards and SAMA5D27 SOM1 EK, TM...
Console no longer receives characters Sometimes the console no longer receives characters. It can prevent from stopping the boot sequence. If it happens, please follow...
Convert SAM BA scripts This page can help you convert your SAM BA script from one revision of SAM BA to the other. We made some little changes to the SAM BA API and...
Setup ARM Cross Compiler 4.9.4 Ubuntu: In Ubuntu, you can install the ARM Cross Compiler by doing: sudo apt get install gcc arm linux gnueabi export CROSS...
Crypto hardware acceleration Introduction This page is mainly about how to use crypto hardware acceleration in OpenSSL.Many internet applications such as OpenSSH...
Secure Protocol Layers Improved Performances (SPLIP) Introduction This page describes the SPLIP feature introduced with SAMA5D2 SoCs. It combines both the Atmel AES...
DT Overlay Introduction Device tree overlay is ... Build DT Overlay from sources Setup ARM Cross Compiler If using an old toolchain, there have been reported...
Demo archives linux4sam 6.0 Pre built Demo Demo archives linux4sam 5.8 Pre built Demo Demo archives linux4sam 5.7 Pre built Demo Demo archives linux4sam...
tag Kernel Pre built Demo Board Description Binary Sources location SAMA5D4 Xplained Linux4SAM Yocto / Poky based demo compiled from...
tag Kernel tag Kernel Pre built Demo Board Description Binary Sources location SAMA5D2 Xplained Linux4SAM Yocto / Poky based demo...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto / Poky based demo SD Card image \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto / Poky based demo NAND Flash \ AT91SAM9x5 EK...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag SAMA5D4 Xplained board support HDMI driver for SiI902x component on SAMA5D4 EK and SAMA5D4 Xplained boards power management enhancements power...
Create a SD card with the demo You need a 1 GB SD card (or more) and to download the image of the demo. The image is compressed to reduce the amount of data to download...
Driver Model in U Boot Introduction Driver model in U Boot is to provide a consistent model for U Boot drivers and the platform data / device tree information used...
FAQ about Linux support on AT91SAM9N12 EK How to use BuildRoot with an old Linux distribution? A: We have experienced some troubles using BuildRoot on old Linux...
FAQ about AT91SAM9x5 SoC family How to use BuildRoot with an old Linux distribution? A: We have experienced some troubles using BuildRoot on old Linux distribution...
Flash an UBI/UBIFS root filesystem Introduction This section describes how to load a UBI root filesystem image into the NAND FLASH of the board with SAM BA and...
Flash an UBI/UBIFS root filesystem Introduction This section describes how to load a UBI root filesystem image into the NAND FLASH of the board with SAM BA and...
Older boards Getting Started for SAMA5D3 EK SAMA5D3 EK page Getting Started for SAMA5D4 EK SAMA5D4 EK page Getting Started SAM9 Introduction This...
Flashing a demo for AT91SAM9N12 family (for SAM9N12, SAM9CN11 and SAM9CN12) Before flashing the demo, make sure that you have installed the SAM BA tool on...
Flashing a demo for AT91SAM9x5 family (for SAM9G15, SAM9G25, SAM9X25, SAM9G35 and SAM9X35) Before flashing the demo, make sure that you have installed the...
Flashing a demo for SAMA5D3 Xplained SAMA5D3 Xplained board http://www.at91.com/linux4sam/pub/Linux4SAM/GettingStarted a5d3 xplained/sama5d3 xplained.png Access...
Flashing a demo for SAMA5D3x family (for SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36) Evaluation Kit Access the console on DBGU serial port You can...
Flashing a demo for SAMA5D4 Xplained Evaluation Kit Access the console on DBGU serial port The DBGU serial console can be accessed from two connectors...
Flashing a demo for SAMA5D4 EK (for SAMA5D4 family: SAMA5D41, SAMA5D42, SAMA5D43 and SAMA5D44) Evaluation Kit Access the console on DBGU serial...
GUI Solutions Crank Software Storyboard Suite for Atmel Microcontrollers Create rich UIs for Atmel Microcontrollers quickly and with ease using Crank Software...
Home Automation Demo Tips Tricks Demo revision Make sure that you have the latest demo revision: be sure to run Demo version 4.2 onwards . Compared to demo shipped...
Use of the AT91 ADC driver Introduction This is the description of the Microchip AT91 ADC driver. It is used for SoC based on ARM9 cores and SAMA5D3 and SAMA5D...
Common to most of the boards Serial terminal configuration common Exceptions: sama5d2 revision A , only to access the ROMCode through serial interface and...
Legacy AT91Bootstrap Introduction AT91Bootstrap is a first step bootloader providing a set of algorithms to manage hardware initialization (GPIO, Clock, SDRAM...
Legacy Getting Started Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded Linux distribution...
Legacy Getting Started Page for AT91SAM9N12 EK Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded...
Legacy Getting Started page for AT91SAM9x5 family Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded...
Legacy Linux4SAM material For SAM9x5 family Legacy SAM9x5 family special page Legacy GettingStarted for AT91SAM9x5 family For SAM9n12 family Legacy SAM9N12 family...
Legacy Linux Kernel Page Ecosystem Kernel Archives is the primary site for the Linux kernel source. All Linux kernel versions, including latest snapshot or...
AT91SAM9N12 EK Special Page (for SAM9N12, SAM9CN12, SAM9CN11) Introduction Welcome to the Linux4SAM page dedicated to the newly introduced AT91SAM9N12 EK board...
AT91SAM9x5 family special page (for SAM9G15, SAM9G25, SAM9X25, SAM9G35 and SAM9X35) Introduction Hi! Welcome to the Linux4SAM page dedicated to the newly...
Legacy U Boot Page Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several...
LinksToCommunities This topic aggregates the contact informations from open source communities that are represented on this website. In order not to duplicate...
Linux Kernel Ecosystem Kernel Archives is the primary site for the Linux kernel source. All Linux kernel versions, including latest snapshot or `release candidate...
Now we Configure and Build kernel for board: $ make ARCH arm sama5 defconfig HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig...
Linux Kernel 3.10 Linux 3.10 for AT91 source code The Linux kernel for Atmel ARM based SoC (aka AT91) is distributed as a GIT tree hosted on GitHub as a fork...
Linux Kernel 3.18 Linux 3.18 for AT91 source code The Linux kernel for Atmel ARM based SoC (aka AT91) is distributed as a GIT tree hosted on GitHub as a fork...
Linux Kernel 4.1 Linux 4.1 for AT91 source code The Linux kernel for Atmel SMART Processor Based PMUs (aka AT91) is distributed as a GIT tree hosted on...
Linux Kernel 4.14 Linux 4.14 for AT91 source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
Linux Kernel 4.4 Linux 4.4 for AT91 source code The Linux kernel for Atmel SMART Processor Based PMUs (aka AT91) is distributed as a GIT tree hosted on...
Linux Kernel 4.9 Linux 4.9 for AT91 source code The Linux kernel for Microchip ARM Based PMUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
Linux Kernel legacy Linux 3.6.9 for AT91 source code The Linux kernel for Atmel ARM based SoC (aka AT91) is distributed as a GIT tree hosted on GitHub as a...
Home page of the Atmel Linux Newsletter Table of content: 2016 March 2016 February 2016 January 2015 August 2015 July 2015 June
Hi all, Like we did last month, we only keep the title in this email. So, don`t hesitate to click on the topic of your choice and follow the link through http://www...
Hi all, Yes, the Atmel Linux newsletter for July 2015 is ready! This time we`ve tried another diffusion technique by using our Linux4SAM.org website storing the...
Hi, The Atmel Linux team is pleased to start this new monthly newsletter. We will present you the major events in the Open Source Community around the Atmel products...
Hi, For this newsletter, I`m happy to welcome another contributor: Ludovic Desroches who wrote about a topic that he likes: Buildroot! By the way, don`t hesitate to...
Hi all, It has been a busy end of year 2015 and beginning of 2016: So let`s share with you some of the enhancements added to our Linux offer. Don`t hesitate to follow...
Hi, Here is are some updates on the Linux related topics for March 2016. Table of contents: Linux kernel 4.5 The new release of the Linux kernel, 4.5, was published...
Login only available to Linux4SAM website creators. Login This is not a collaborative portal but feel free to post comments or enhancements through the LinksToCommunities...
Board Template Page Kit Information Kit Overview Access the console Demo Demo archives Play with the demo Build From source code Setup ARM Cross Compiler...
Like in the Getting Started document, it is admitted that your OpenEmbedded building environment is located in /stuff/ directory (it may correspond to a working...
Like in the Getting Started document, it is admitted that your OpenEmbedded building environment is located in /stuff/ directory (it may correspond to a working...
OpenEmbedded / Angstrom Demo Requirements SAM board power supply Serial, USB Ethernet cables USB hub USB keyboard mouse USB key...
OpenEmbedded / Angstrom papers and presentations Papers and presentations 2004 to the GPE Palmtop Environment and the OpenEmbedded Project 2005 Embedded...
OpenEmbedded / Angstrom Introduction is a powerful building environment. http://www.angstrom distribution.org/ Angstrom uses this environment to bring up...
OpenEmbedded / Angstrom : build from sources How to build Angstrom for AT91 Note that building an entire distribution is a long process. It also requires a big...
OpenEmbedded / Angstrom : get demo binaries Root file system pre built images The Root file system images are images of jffs2 filesystems containing a entire...
OpenEmbedded / Angstrom : use the demo root filesystem Boot to the installed rootfs Check Load Linux with u boot chapter in the u boot page to know how to load...
Like in the Getting Started document, it is admitted that your OpenEmbedded building environment is located in /stuff/ directory (it may correspond to a working...
OpenWrt Introduction OpenWrt is an open source project for embedded operating system based on Linux, primarily used on embedded devices to route network traffic...
PDA detection at boot Since U boot 2018.07, released with linux4sam 6.0, we have the feature of auto detection of the connected PDA screen One wire EEPROM The PDAs...
How to use record audio stream with PDMIC Introduction The Pulse Density Modulation Interface Controller (PDMIC) is a mono PDM interface controller and decoder that...
Now you should have the Linux demo up`n running on your board ! You can access the Linux console through the serial line as explained just above Use the root login...
Enable and Configure PMECC (Programmable Multibit ECC) in AT91SAM SoC Introduction This page is mainly about how to enable and configure the PMECC in AT91SAM...
OpenEmbedded / Yocto Project / Poky: build from sources How to build Poky for AT91 Note that building an entire distribution is a long process. It also requires...
How to use Pulse Width Modulation driver Introduction This page describes how PWM could be configured, debugged and used on SAMA5D2 devices. Since linux...
Real Time solutions on AT91SAM SoC Introduction This page aims at presenting the two most important real time Linux solutions, their setup and the expected performances...
SAM9M10 Gstreamer Introduction This page is a starting point to understand video capabilities of the AT91SAM9M10, and the basics of GStreamer. It contains the...
AT91SAM9M10 Special Page Introduction Hi! Welcome to the Linux4SAM page dedicated to the newly introduced AT91SAM9M10 SOC. This page provides the latest information...
SAM9x5 v4l2 video output for Mplayer Introduction The SAM9x5 parts with a LCD controller have an overlay layer which supports some hardware acceleration for video...
SD card boot for AT91SAM SoC Introduction This page is mainly about how to make a bootable SD card for AT91SAM SoCs. It also includes some FAQs about SD card...
SAMA5D27 SOM1 Evaluation Kit SoC Features Recent FAQ
SAMA5D2 PTC EK Board SoC Features Recent FAQ
SAMA5D2 Xplained Board SoC Features Recent FAQ
SAMA5D3 Xplained Board SoC Features Recent FAQ
SAMA5D3XEK SoC Features Recent FAQ
SAMA5D4 Xplained Board SoC Features Recent FAQ
SAMA5D4EK SoC Features Recent FAQ
SAM BA 3 subsections Install SAM BA software in your PC In addition to the official SAM BA pages on http://www.microchip.com, we maintain information about SAM BA...
Connect the SAM BA with USB Install SAM BA software in your PC 172677.700868 usb 2 1.4.4: new full speed USB device number 31 using ehci pci 172677.792677 usb...
Shutdown / Wake Up FAQ Use the Wake Up function on AT91SAM9x5 EK board There are two options to wake up the board: using the WAKE UP button located on...
SAMA5D2 Chip Features The SAMA5D2 series is a high performance, ultra low power ARM Cortex A5 processor based MPU. The Cortex A5 processor runs up to 500MHz and features...
Software Tools SAM BA (SAM Boot Assistant In system Programmer) can run on: Windows 32 bit and 64 bit Linux x86 and x86 64 (Cf. Tested Linux distributions...
Store root filesystem on a SD card The default boot environment is built to run form the first partition of an ext4 formated SD card. It is seen as mmcblk1p1 from...
Tips and Tricks Shutdown Wakeup Using Ultra Low Power mode 1 (ULP1) on SAMA5D2 Using the SAMA5D2 (and compatible) ADC device Audio recording with PDMIC GuiSolutions...
U Boot Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several processors...
U Boot FAQ How do I use U Boot to store binaries in FLASH ? A: One U Boot available on the board, you can use it to flash binaries on storage media. The following...
U Boot FIT image support Introduction U Boot FIT image is a uImage format which can combine the Kernel zImage and Kernel dtbs. For more information, check the document...
Dedicated page on U Boot wiki: http://www.denx.de/wiki/U Boot/SourceCode You can easily download U Boot source code from GitHub U Boot repository: clone the Linux4sam...
USB gadget configuration Introduction This page is mainly about how to configure USB Gadget on Linux kernel. Problem statement USB Gadget ConfigFS is an interface...
U Boot FIT image support Introduction U Boot FIT image is a uImage format which can combine the Kernel zImage and Kernel dtbs. For more information, check the document...
Use SAM BA Programming a demo can be done by using the .bat or .sh scripts provided or by using the SAM BA GUI. We`ll focus on the latest solution. The components...
How to use the Atmel KMS/DRM LCD driver Introduction Since linux 3.18 at91, the recent Atmel SoCs have a new LCD driver that is based on the Linux KMS/DRM sub system...
Using FIT with overlays Since U boot 2018.07, released with linux4sam 6.0, we have the feature of adding Device Tree overlays to the base Device Tree at boot time...
UsingISC (Image Sensor Controller) Introduction This page describes how to configure and use of the ISC in SAMA5D2 SoC with the image sensors. The Image Sensor...
Using ISI (Image Sensor Interface) Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different image sensors. The...
UsingMaxTouch Introduction The maXTouch Series features a complete portfolio of high performance single chip controllers designed to address every touchscreen size...
Using the SAMA5D2 compatible ADC device Introduction This page describes how to test the features of the SAMA5D2 compatible ADC device. This driver uses the Industrial...
Using the SAMA5D2 compatible Resistive Touchscreen The SAMA5D2 SoC has the support for Resistive Touchscreen. This feature is embedded in the ADC device. This cannot...
Using Ultra Low Power mode 1 (ULP1) on SAMA5D2 Introduction In products like the SAMA5D2 the Ultra Low Power mode 1 is available to gain even more power when the...
Video player demo Introduction For a pleasant out of the box experience using the AT91SAM9x5 family (SAM9G15, SAM9G25, SAM9G35, SAM9X25, SAM9X35) a QT based demo...
TWiki`s Linux4SAM web The 1 web of TWiki. TWiki is a Web Based Collaboration Platform for the Enterprise.
Recent update of FAQ This is the recent update of FAQ based on classification defined by WebFaqBaseForm FAQ updates by Boards $ Sama5d27Som1EK: $ Sama5d2PtcEK...
FAQ classification base form of Linux4SAM This is the base form for classification for Linux4SAM. Form Definition Name Type Size Values Tooltip...
Welcome to 1 Welcome to the main starting point for Linux OS on SAM products. Its aim is to centralize information about Linux kernel and open source projects on...
Linux4SAM Software tools AT91Bootstrap U Boot / barebox Linux Kernel Open source solutions Yocto Project Buildroot OpenWrt Boards SAMA5D...
This is a subscription service to be automatically notified by e mail when topics change in this 1 web. This is a convenient service, so you do not have to come...
Linux4SAM Web Preferences The following settings are web preferences of the Linux4SAM web. These preferences overwrite the site level preferences in...
/Linux4SAM The 1 web of TWiki. TWiki is a Web Based Collaboration Platform for the Enterprise.
Statistics for Linux4SAM Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic save...
Dec 2007 23167 1 0 3590 WebHome 2464 LinuxKernel 2349 GettingStarted 2221 U Boot 2056 SoftwareTools 2042 AT91Bootstrap 1468 OpenEmbeddedAngstromBuild...
Dec 2008 53899 105 4 19583 WebHome 4849 U Boot 4684 GettingStarted 4588 LinuxKernel 3774 SoftwareTools 3479 AT91Bootstrap 2320 OpenEmbeddedAngstrom...
Sep 2009 49306 9 0 21174 WebHome 3980 LinuxKernel 3692 U Boot 3677 GettingStarted 2856 AT91Bootstrap 2826 SoftwareTools 1540 OpenEmbeddedAngstrom...
Statistics for Linux4SAM Web 2010 Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic...
Top Menu of Linux4SAM Web This topic defines the menu structure of the Linux4SAM web, used by the TopMenuSkin. 1 Web` Create New Topic...
Yocto Project Introduction The Project is a powerful building environment. It is build on top of several components including the famous OpenEmbedded build...
Yocto Project FAQ The obp utils do install task fails When building a distribution including the meta atmel layer, I have an error which state that the obp...
Number of topics: 158

See also the faster WebTopicList

r1 - 15 Nov 2006 - 19:43:52 - TWikiContributor
 
Linux & Open Source related information for AT91 Smart ARM Microcontrollers

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Atmel® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. This site is powered by the TWiki collaboration platform

ARM® and others are registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.

Ideas, requests, contributions ? Connect to LinksToCommunities page.

Syndicate this siteRSS ATOM