This is a low cost SBC based on the ATMEL AT91RM9200 ARM9 Controller with Support for main stream linux tuned for AT91 and named as G-Linux (2.4.x/2.6.x) and WindowsCe-4.2 Hardware Specification Are As Follows 1) AT91RM9200 @ 200 MHZ PQFP-208 2) SDRAM 32-64 MB @100MHz 3) Parallel FLash 8 MB 16 bit 4) Serial DATAFlash 8MB 5) 10/100 MB Ethernet Port A onboard -dm9161 6) 10/100 MB Ethernet Controller PORT B 7) USB Host Port Connector 8) USB Device Port Connector 9) Onboard Connector For Easy Add On 10) SD/MMC Card Socket Connector Onboard 11) Switch Mode Regulators Onboard 12) Can be Powered Through USB Device Most Exciting feature is about the Linux 2.4 , the G-Linux Version is provided with Preemptive patch adopted from the X86 varient With all these features cost is still below US $ 100* for Bulk.:-) Contact ---------> w.mohanrao@gmail.com