tell me how to make jffs2's rootfilesystem?

This forum is for users of Microchip MPUs and who are interested in using Linux OS.

Moderator: nferre

Posts: 5
Joined: Mon May 15, 2006 3:00 am

tell me how to make jffs2's rootfilesystem?

Fri May 19, 2006 9:36 am

i use linux kernel 2.6.10 boarder is at91rm9200dk.Anybody can tell me how to make jffs2's rootfilesystem
Location: Sweden
Posts: 134
Joined: Wed Feb 18, 2004 5:53 pm

Tue Aug 29, 2006 8:26 am

Download buildroot from and then
configure it to generate a JFFS2 file system.
There are issues with some application packages that
can be built with buildroot.
Buildroot has hardwired which version of the package
should be used, and sometimes you have to update the version number.
If you only enable busybox, then it will probably build without problems.
Best Regards
Ulf Samuelsson
Posts: 11
Joined: Thu Sep 14, 2006 10:12 pm

how to make jffs2's rootfilesystem?

Thu Sep 14, 2006 10:30 pm

I have the same problem on a customize AT91RM9200 board
I use buildroot from and compiling it and I get a JFFS2 file system
I use u-boot 1.1.4 and kernel 2.6.17
But I don't know to make it boot from flash

What I have to put ont the bootcmd parameter to boot the kernel and the file system ?

How to manage the mapping of the flash ?


Return to “LINUX”

Who is online

Users browsing this forum: No registered users and 6 guests