Freze of AT91SAM9261

This forum is for users of Atmel's SAM Series and who are interested in using WinCE OS.

Moderator: nferre

a.biasci
Posts: 6
Joined: Mon Sep 20, 2010 1:16 pm

Freze of AT91SAM9261

Wed Oct 13, 2010 10:09 pm

Hi,
I have a problem with AT91SAM9162-EK evaluation board. I use WinCE 6.0 R3 with Platform Builder (VS 2005 + SP 1 + SP Vista + PB SP1).
I have created a new OS Project with the ATMEL BSP develop for this board. The project compile fine and I can execute it into my board. I have enabled KITL and Debugger. The project is started inVS2005 with "Attach to Device" function and the image is transfered with TFTP to the target. The image is loaded and start but after some minutes I lost all control on the board and it seem not responding anymore.

I try to send PING to my board but no response is received. I try to connect with telnet but it fails. I try to connect with Display Remote Device (cerdisp) but after few seconds it freeze.

I don't know what is the problem and where I can search for resolve it. Someone had the same problem with this board? I have to enable some options?

Thanks for any help.

Return to “WinCE”

Who is online

Users browsing this forum: No registered users and 1 guest