Does anyone know why the ADC example at Project/Controleurs/cVisualisation.php? ... sation=315 is password protected, or what the password is? It seems like a lot of people have this question, so it would be very helpful if someone could provide and answer in the forum so that everyone can read it.
Thanks
Use of Analog to Digital with AT91SAM7S
Moderator: nferre
Post
I had the same problem with the password protected file AT91SAM7S256-BasicADC.zip
I found a source without password protection:
ftp://61.152.238.186/ARM7_SOURCE/AT91SA ... A-1_21.zip
I found a source without password protection:
ftp://61.152.238.186/ARM7_SOURCE/AT91SA ... A-1_21.zip
- GregoryN
- Contact:
- Location: Russia
Post
hello! Could anyone send me this archive (without password) on mail please?
I cant download pass-free archive for some reason
And i cant bruteforce archive with pass, my notebook tried to do it whole night)
my mail: gregoryn@inbox.ru
I cant download pass-free archive for some reason

my mail: gregoryn@inbox.ru
Post
Re: Use of Analog to Digital with AT91SAM7S
Don't suppose anybody would be able to post those files? The IP address in the link above no longer seems to work, and the original files are still password protected.
BTW, how'd you go about finding the address of the server the files were on anyway?
Thanks!
BTW, how'd you go about finding the address of the server the files were on anyway?
Thanks!
Post
Re: Use of Analog to Digital with AT91SAM7S
In case anybody's still looking, I found a copy at http://www.mikrocontroller.net/topic/88515
Post
Re: Use of Analog to Digital with AT91SAM7S
is there any particular configuration tips to AtoD convertion with AT91SAM7S??
http://electrotechnic.mihanblog.com/post/24
http://electrotechnic.mihanblog.com/post/24
Post
Re: Use of Analog to Digital with AT91SAM7S
Hello!
I am going to implement some ADC's on my SAM7X and have some questions:
Q1: Can the referred code be used for SAM7X as well (in case, where can I find the source code)?
Q2: Does anyone know some application-notes or links on how to set up (configure and initialize) the ADC's for this MCU and how to perform the actual measurements?
Best Regards
Terje Bohler
t.bohler@unitechenergy.no
I am going to implement some ADC's on my SAM7X and have some questions:
Q1: Can the referred code be used for SAM7X as well (in case, where can I find the source code)?
Q2: Does anyone know some application-notes or links on how to set up (configure and initialize) the ADC's for this MCU and how to perform the actual measurements?
Best Regards
Terje Bohler
t.bohler@unitechenergy.no
Who is online
Users browsing this forum: Bing [Bot] and 2 guests