sam-prog / sam-ba

Microchip in-system programming solution: SAM-BA

Moderators: nferre, fab

danielt3
Posts: 1
Joined: Mon Dec 22, 2008 1:06 pm

sam-prog / sam-ba

Mon Dec 22, 2008 1:14 pm

Hi all

I'm having some problems here with sam-prog. It simply does not work and emits an MFC application error. I heard that there is a registry setting that can put it to work but i have not found anything yet.

I'm trying to upload the code to a AT91SAM7S64-EK on WinXP via USB and serial port and neither have worked until now.

On the other hand i can load the sam-ba program and send it commands but this seems not to be working also. I use HyperTerminal to send the commands. I think i have not figured out the correct address to load the firmware on the flash because the program do the upload but it does not start at all. Also, i can't read the ChipID register correctly (guess it is the same problem with address) neither via the sam-ba nor via the at91_bootdll example, which i compiled, modified (maybe incorrectly) and run but it does not return correct answers.

Thanks in advance!

Return to “SAM-BA”

Who is online

Users browsing this forum: No registered users and 1 guest