Software Tools

SAM-BA

The SAM Boot Assistant (SAM-BA) comes with the AT91 In-system Programmer (ISP). It allows to program flash media through RS232, USB or Jtag SAM-ICE link. SAM-BA only runs on Windows.

Description Binary FAQ applicable
SAM Boot Assistant (SAM-BA) on http://www.atmel.com AT91 In-system Programmer (ISP) for at91sam9xe (SAM-BA 2.8),
for at91sam9g20 (SAM-BA 2.8),
for at91sam9263 (SAM-BA 2.7)

SAM-BA Windows Vista initiative

A revision of SAM-BA is ported to Windows Vista. It is at the side of the official SAM-BA ISP revision.

SAM-BA Windows Vista uses the USB connexion through CDC usbserial driver to communicate with the device.

Description Binary FAQ applicable
SAM Boot Assistant (SAM-BA 2.9) Windows Vista port initiative using CDC http://www.atmel.com/dyn/resources/prod_documents/sam-ba_2.9_cdc_xp_vista.zip  
SAM Boot Assistant (SAM-BA 2.8) Windows Vista port initiative using CDC sam-ba_cdc_2.8.xp_vista_01.zip for at91sam9xe, for at91sam9g20

Windows Embedded CE

A trial version is available on Microsoft Windows Embedded CE web page

You can find the elements needed to try CE 6, including Visual Studio 2005 trial version here.

r9 - 15 Jan 2010 - 15:46:34 - PatriceVilchez
 
This site is powered by the TWiki collaboration platformCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Atmel® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries.
ARM® and others are registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.
Windows® and others are registered trademarks of Microsoft Corporation in US and/or other countries.
Syndicate this site RSSATOM