Page 1 of 1

Problem with ethernet on AT91SAM9260 board

Posted: Mon Jan 29, 2007 11:44 pm
by sadams
Linux+ethernet runs fine on the AT91SAM9260-EK eval board
but not on our custom board. We cannot receive ethernet packets
from the PHY on our board.

PHY links with the network fine and we can xmit packets. Just not
receive. Exact same code works fine on the eval board.

Only difference is that our new board has REV A silicon while the
eval board has Rev DV.

We are using the kernel patch from timesys:
board-armv5l-at91sam9260-all-2.6.15.4a.patch

Any suggestions, known issues, errata, etc ??
?