I try use barebox with sama5d3 Xplained, but I have a some problems.
I can generate the file zbarebox.bin
1 - export ARCH and CROSS_COMPILE
2 - make sama5d3_xplained_defconfig
3 - make
and install this file using u-boot (via tftp).
1 - tftp 0x20000000 zbarebox.bin
2 - go 0x20000000
Run barebox from RAM and install barebox in Nand. (Network works)
3 - update -t barebox -d nand -f zbarebox.bin
After I reset the board, run barebox, configure eth0 and run dhcp but the network is down and i can't update the board.
The first time I can install barebox using tftp (update ....) but after I can't update nothing.
Is there something I am doing wrong?