Matrix organized SPI bus driver

This forum is for users of Microchip MPUs and who are interested in using Linux OS.

Moderator: nferre

Posts: 1
Joined: Fri Feb 22, 2019 2:59 pm

Matrix organized SPI bus driver

Thu Jun 06, 2019 12:23 pm

Dear All,

I am using SAMA5D27-SOM1.
I would need to communicate to multiple specific chips over SPI but this chip has a reduced pin configuration - only SDI and SCK without chip select and SDO. The communication would be only one way, so basically it is enough.
The suggested connection from manufacturer is a matrix organized SPI bus with multiple SCKs and SDIs where you can address the individual chips by using the corresponding SCK and SDI - see attached schematic (forget the SW1 and SW2 pins, they are only contact outputs of a switch).

Do you happen to know a linux driver for such configuration or a nice workaround? Of course it can be solved by multiplexing the SPI bus but maybe a better solution exists.

Thank you for your suggestions.


Return to “LINUX”

Who is online

Users browsing this forum: No registered users and 4 guests