Hello Dear Sir:
I've download an linux-kernel 2.6.0 and has install the patch 2.6.0.rmk2. from arm-linux-org. but when I try to compile, I can't found at91rm9200 default config on it. Is that mean linux2.6 doesn't support at91rm9200?
or could you please give me some instruction on how to apply the latest version of linux on at91rm9200dk?
best regards
bird.
how to complie a latest version of arm linux
Moderator: nferre
- edi
- Contact:
- Location: Germany
Post
Hi,
there is a mailing list for the ARM linux kernel.
You can search this list using GOOGLE.
For instance if you want to find thinks about at91rm9200 (in this list), simply type the following into the search mask of GOOGLE:
site:lists.arm.linux.org.uk at91rm9200
I hope this will help.
Best regards,
Edi
there is a mailing list for the ARM linux kernel.
You can search this list using GOOGLE.
For instance if you want to find thinks about at91rm9200 (in this list), simply type the following into the search mask of GOOGLE:
site:lists.arm.linux.org.uk at91rm9200
I hope this will help.
Best regards,
Edi
- koan
- Contact:
- Location: Bergamo, Italia
- Mike Crowe
- Contact:
- Location: Long Beach, MS
Post
supported under
2.6.11 is being pretty heavily worked on at this time see http://maxim.org.za/AT91RM9200/ for details
Wow Linux runs on that little thing?!
- Mike Crowe
- Contact:
- Location: Long Beach, MS
Post
supported under
2.6.11 is being pretty heavily worked on at this time see http://maxim.org.za/AT91RM9200/ for details
Wow Linux runs on that little thing?!
Who is online
Users browsing this forum: No registered users and 4 guests