RAS GPRS Modem connection - failure

This forum is for users of Atmel's SAM Series and who are interested in using WinCE OS.

Moderator: nferre

Posts: 9
Joined: Fri Apr 02, 2010 2:56 pm

RAS GPRS Modem connection - failure

Thu May 13, 2010 3:41 pm

Dear all,
I am trying to have a RAS connection on COM2 with a GPRS modem.
I am using wince 6.0 r3.

My board is an AT91SAM9261EK with Adeneo BSP.

What I can see is that the RAS connect successfully to a mobile network but
it looks like the authentication either fails or freezes.

Infact I have compared the Dial Up phases between the board and the emulator:

Emulator: Opening Port--> Dialing…--> Device Connected--> User
Authenticated--> Connected
Board: Opening Port--> Dialing…--> Device Connected

The board is missing User Authenticated & Connected steps.

Does anyone of you have a suggestion?
Location: France - USA
Posts: 183
Joined: Fri May 14, 2004 9:58 am

Re: RAS GPRS Modem connection - failure

Mon Jun 21, 2010 3:09 pm

Hi adamax,

Serial port driver has been fully tested but perhaps there is an issue under certain conditions.
If you need help to investigate and solve your problem, please contact our sales team at sales.emea@adeneo-embedded.com


Return to “WinCE”

Who is online

Users browsing this forum: No registered users and 3 guests