Chainable interupts on SAM9263 WinCE 6.0 R2 binary BSP

This forum is for users of Atmel's SAM Series and who are interested in using WinCE OS.

Moderator: nferre

chronos
Posts: 5
Joined: Mon Nov 26, 2007 2:11 pm

Chainable interupts on SAM9263 WinCE 6.0 R2 binary BSP

Tue Nov 27, 2007 5:21 pm

Hi,

I've just get the WinCE 6.0 R2 binary BSP from the FTP site.
To test WinCE capcity I simply want to trigger an hardware interuption and count...
Is there any chainable interupt in the binary bsp to wich I can hook, or must I get the BSP sources and create a device driver to do so ?

Cheers.
Adeneo
Contact:
Location: France - USA
Posts: 183
Joined: Fri May 14, 2004 9:58 am

Wed Dec 05, 2007 2:50 pm

Hi,

I don't really understand what you want to do?
What do you mean by chainable interrupt?

On WinCe you can implement Installable ISR, which overwrite the standard ISR for one IRQ, but you can use the standard ISR too.
Do you know which interrupt source you want to use?

With the Binary BSP you can easily create a new driver which configures the interrupt and counts each time the interrupt has been triggered.

Regards
chronos
Posts: 5
Joined: Mon Nov 26, 2007 2:11 pm

.

Wed Dec 12, 2007 5:32 pm

Yes it what I've done in fact.
Thanks
yanker-ssnh
Contact:
Location: Russia
Posts: 13
Joined: Thu Dec 06, 2007 1:36 pm

Thu Dec 13, 2007 11:52 am

Hi, I want to write device driver for manage gpio and I want to see small example.
Can you write this or give me link to exaamle.
Platform: AT91SAM9263-EK
BSP: evalution from adeneo ftp

Thanks
vb
vb12530dc

censored

Mon Aug 18, 2008 11:53 am

censored



_____________________________________________________

[font=Arial]12530[/font][font=Arial] [/font][font=Arial]12530[/font][font=Arial] [/font][font=Arial]fj.12530[/font][font=Arial] [/font][font=Arial]bj12530[/font]

Return to “WinCE”

Who is online

Users browsing this forum: No registered users and 2 guests