Page 1 of 1

problem Event with serial port on CF 2.0

Posted: Thu Jun 05, 2008 1:33 pm
by monmon
Hello,

I try to receive the data on a serial port.To do that, I use the event (DataReceived of the SerialPort Class).
I can see the first event but after that I can't catch anymore event!

I already put the RxBuffer to 1 and nothing appends.

Anybody can help me?

the bsp version is 1.2.0 and the compact framework 2.0 SP2.

If it's not clear ask me.

Thank you.

monmon

Re: problem Event with serial port on CF 2.0

Posted: Mon Oct 26, 2009 6:04 pm
by tecnors
Hello,
I have the same problem.
I would like know if the BSP 1.3.0 does not support event rx on serial channel.

Thanks

Re: problem Event with serial port on CF 2.0

Posted: Tue May 25, 2010 10:41 am
by tecnors
up.....

Adeneo don't answer?

Re: problem Event with serial port on CF 2.0

Posted: Mon Jun 21, 2010 3:08 pm
by Adeneo
Hi monmon & tecnors,

Serial port driver has been fully tested but perhaps there is an issue under certain conditions.
If you need help to investigate and solve your problem, please contact our sales team at sales.emea@adeneo-embedded.com

BR