no valid processor id found [solved]

Discussion around product based on ARM Cortex M3 core.

Moderators: nferre, ncollot

yvonperr
Posts: 3
Joined: Thu Aug 27, 2009 2:39 pm

no valid processor id found [solved]

Thu Aug 27, 2009 2:44 pm

Hi

When using the sam-ba ver 2.9 or sam-prog ver 2.4 with the sam3u4-ek development board and either the sam-ice or rs232 I get the following error: "No valid processor ID found"

any ideas ?

Yvon
Anny.Lee09
Posts: 21
Joined: Sat Aug 22, 2009 8:12 am

Re: no valid processor id found

Fri Aug 28, 2009 2:04 am

Hi,
I use sam-ba v2.9 for at91sam3u4-ek yesterday.It works very well.
Check your supply power and this web may help you.
http://www.atmel.com/dyn/products/tools ... ol_id=3883
An RTOS specially for Cortex-M3----> http://www.coocox.org
yvonperr
Posts: 3
Joined: Thu Aug 27, 2009 2:39 pm

Re: no valid processor id found

Sat Aug 29, 2009 1:37 pm

Hi

Thanks problem was resolved. (Use of Erase pin, jumper JP1).

Yvon

Return to “SAM3 Cortex-M3 MCU”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 1 guest