ATMEL ATSAM3U ARM Cortex-M3 Board

Discussion around product based on ARM Cortex M3 core.

Moderators: nferre, ncollot

daniel_je2007
Posts: 16
Joined: Thu Nov 12, 2009 6:00 am

ATMEL ATSAM3U ARM Cortex-M3 Board

Thu Nov 12, 2009 8:53 am

I would like to share with all of you a full-featured evaluation board which is used the SAM3 Cortex-M3 MCU. Following is the detailed description of this board:

The ATSAM3U ARM Cortex-M3 Board is an ARM embedded evaluation board produced by Embest, integrate the ATMEL Cortex-M3 core-based processor ATSAM3U4E, operating at 96 MHz frequency. The board features USB, I2C, MCI interface, TFT-LCD, USART interface, 96 I/O port, EBI support SRAM/NOR/NAND memory, etc. Plenty of software examples, which can be used in Keil MDK environment, are accompanied in CDROM.
* Internal 256KB Flash, 48KB SRAM
* 240x320 TFT LCD
* Source code of example program

Click here to know more details of this board.
Attachments
ATSAM3U middle.jpg
ATSAM3U ARM cortex-m3 evaluation board
ATSAM3U middle.jpg (18.26 KiB) Viewed 4498 times
Last edited by daniel_je2007 on Thu Dec 03, 2009 4:33 am, edited 1 time in total.
daniel_je2007
Posts: 16
Joined: Thu Nov 12, 2009 6:00 am

Re: ATMEL ATSAM3U ARM-CM3 Board

Fri Nov 13, 2009 5:29 am

If you are interested in this ATSAM3U Cortex-M3 Board, please feel free to visit our site: http://www.embedinfo.com/en/list.asp?id=48. :wink:
Last edited by daniel_je2007 on Thu Dec 03, 2009 4:35 am, edited 1 time in total.
flyingeagle
Posts: 13
Joined: Wed Nov 18, 2009 11:35 am

Re: ATMEL AT91SAM3U ARM-CM3 Board

Wed Nov 18, 2009 11:53 am

Where do I get an JTAG Debugger?
Anny.Lee09
Posts: 21
Joined: Sat Aug 22, 2009 8:12 am

Re: ATMEL AT91SAM3U ARM-CM3 Board

Fri Nov 20, 2009 2:53 am

flyingeagle wrote:Where do I get an JTAG Debugger?
you can try colink(http://www.coocox.org/Colink.htm).

CooCox Colink is open, you can Do It Yourself.
An RTOS specially for Cortex-M3----> http://www.coocox.org
daniel_je2007
Posts: 16
Joined: Thu Nov 12, 2009 6:00 am

Re: ATMEL ATSAM3U ARM-CM3 Board

Tue Nov 24, 2009 5:00 am

There is JTAG Emulator for ARM cortex-m3 processors.
Find more information about it, please click here.
flyingeagle
Posts: 13
Joined: Wed Nov 18, 2009 11:35 am

Re: ATMEL ATSAM3U ARM Cortex-M3 Board

Wed Feb 24, 2010 5:25 am

Can you recommend a development board based on the ATMEL AT91SAM9G45 processor? Thanks. :?:
daniel_je2007
Posts: 16
Joined: Thu Nov 12, 2009 6:00 am

Re: ATMEL ATSAM3U ARM Cortex-M3 Board

Wed Feb 24, 2010 5:39 am

There is an ATMEL SAM9G45 ARM9 Board produced by our company, you can try and have a look: http://www.embedinfo.com/en/list.asp?id=72.

Return to “SAM3 Cortex-M3 MCU”

Who is online

Users browsing this forum: No registered users and 6 guests