Page 1 of 1

CORE9x25 blink LED project

Posted: Fri Jul 29, 2016 12:27 pm
by bhush_t

I am having a CORE9x25 ready module, which has linux image pre-installed.
Basically I am familiar with PIC MCUs, now I had this task to work with CORE9x25.

Can anyone please help me how to start a simple blinky project with this board.
I had searched a lot, but could not find any related include files for this.
I am stucked at how to access GPIO,UART or any other peripherals of the board.

The board is having python2.7 installed.
When I googled about gpio with python for AT91SAM9x25, I get no of posts for Rpi.gpio but could not find related to CORE9x25.

I would appiciate if anyone could help me to start working with CORE9x25 board.


Re: CORE9x25 blink LED project

Posted: Fri Jul 29, 2016 10:00 pm
by blue_z
Check the ACME Systems web site, since they have a similar SAM9G25 module.
You're probably going to have to adapt an RPi project for a Python example.

BTW you've posted in an inappropriate forum.


Re: CORE9x25 blink LED project

Posted: Sun Jul 31, 2016 11:18 am
by bhush_t
Thanks a lot blue_z.

The ACME Systems web site is full of information.
Thanks again.

Best Regards