In preperation of costumization the sam-ba applets, I try to recompile the code of at91sam9263-ek. The make process ends without errors, but the binaries don't work. Sam-Ba will be dead.
Witch version of CodeSourcery should I use. Currently I use 2009q3-68. But the binaries are bigger than the installed originals
e.g: isp-extram-at91sam9263.bin orginal 4644 byte recompiled 4940 byte
Any sugestions?
Thanx Jens
Recompiled Source don't work
- buser
- Location: Riesa (Germany)
Post
Re: Recompiled Source don't work
I have found the error by myself.
I build the isp-extram- for target sdram instead of sram
I build the isp-extram- for target sdram instead of sram
Post
Re: Recompiled Source don't work
Hi
Could you please guide me to re-compile SAM-BA ?
I have SAM-BA v2.8 in windows xp machine. Since my sdram gives issues, i would like to rework on SAM-BA source.
Do I need any specified compiler for it?
Can I use a gcc compiler for it ?
The error message is as follows:
Please help me. Thanks in advance
SJR
Could you please guide me to re-compile SAM-BA ?
I have SAM-BA v2.8 in windows xp machine. Since my sdram gives issues, i would like to rework on SAM-BA source.
Do I need any specified compiler for it?
Can I use a gcc compiler for it ?
The error message is as follows:
Code: Select all
make CHIP=at91sam9260 BOARD=at91sam9260-ek MEMORY=sram_samba DYN_TRACES=1
arm-none-eabi-gcc -g -Os -I../../at91lib/boards/at91sam9260-ek -I../../at91lib/peripherals -I../../at91lib/components -I../../at91lib -Dat91sam9260 -D__ASSEMBLY__ -c -o obj/isp_cstartup.o ../common/isp_cstartup.S
make: arm-none-eabi-gcc: Command not found
make: *** [obj/isp_cstartup.o] Error 127
SJR
Who is online
Users browsing this forum: No registered users and 3 guests