The problem with sending data to nandflash by SAM-BA 2.9

Microchip in-system programming solution: SAM-BA

Moderators: nferre, fab

Torres
Posts: 2
Joined: Mon Mar 22, 2010 12:58 pm

The problem with sending data to nandflash by SAM-BA 2.9

Mon Mar 22, 2010 2:22 pm

I have problem with sending data to nandflash.
I run the .bat file, at91cap9adk-x11-nf.bat, to do the process.
The .tcl file is at91cap9adk-x11-nf.tcl. All the cinfiguration is as the same as the copies download from Atmel Official Webside (the packages: linux-at91cap9adk).

but i got these wrong messages:

-E- Can't send data (0x0000000f)

-E- Script File at91cap9adk-x11-nf.tcl returned error : Can't detect known device - Can't detect known device
while executing
"error "Can't detect known device""
(procedure "GENERIC::Init" line 45)
invoked from within
"GENERIC::Init $NANDFLASH::appletAddr $NANDFLASH::appletMailboxAddr $NANDFLASH::appletFileName [list $target(comType) $target(traceLevel)]"
(procedure "NANDFLASH::Init" line 10)
invoked from within
"NANDFLASH::Init"
(file "at91cap9adk-x11-nf.tcl" line 33)
invoked from within
"source $scriptFile"

--
the whole logfile:

-I- Waiting ...
-I- TCL platform : Windows NT
-I- SAM-BA 2.9 on : windows
-I- Retrieved arguments from command line :
-I- argv 0 : \usb\ARM0
-I- argv 1 : AT91CAP9-DK-MEM33
-I- argv 2 : at91cap9adk-x11-nf.tcl
-I- Connection : \usb\ARM0 (target(comType) = 0)
-I- Board : at91cap9-dk-mem33
-I- Traces Level : 4
-I- target(handle) : 18025392
Read device Chip ID at 0xfffff240 --- get 0x00000000
Read device Chip ID at 0xffffee40 --- get 0x039a03a0
-I- Found processor : at91cap9 (Chip ID : 0x039a03a0)
-I- External RAM Settings : extRamVdd=1, extRamType=0, extRamDataBusWidth=32, extDDRamModel=0
-I- Loading applet isp-extram-at91cap9.bin at address 0x101000
-I- Memory Size : 0x4000000 bytes
-I- Buffer address : 0x102354
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- External RAM initialized
-I- Command line mode : Execute script file : at91cap9adk-x11-nf.tcl
-I- === Initialize the NOR flash access ===
-I- NORFLASH::Init (trace level : 4)
-I- Loading applet isp-norflash-at91cap9.bin at address 0x70000000
-I- Memory Size : 0x800000 bytes
-I- Buffer address : 0x7000378C
-I- Buffer size: 0x10000 bytes
-I- Applet initialization done
-I- === Erase all the NOR flash blocs and test the erasing ===
-I- Erasing blocks at address 0x0
-I- Erasing blocks at address 0x80000
-I- Erasing blocks at address 0x100000
-I- Erasing blocks at address 0x180000
-I- Erasing blocks at address 0x200000
-I- Erasing blocks at address 0x280000
-I- Erasing blocks at address 0x300000
-I- Erasing blocks at address 0x380000
-I- Erasing blocks at address 0x400000
-I- Erasing blocks at address 0x480000
-I- Erasing blocks at address 0x500000
-I- Erasing blocks at address 0x580000
-I- Erasing blocks at address 0x600000
-I- Erasing blocks at address 0x680000
-I- === Load the bootstrap in the first sector ===
-I- Send File at91cap9adk-bootstrap-nf.bin at address 0x00000000
GENERIC::SendFile at91cap9adk-bootstrap-nf.bin at address 0x0
-I- File size : 0xD2C byte(s)
-I- Writing: 0xD2C bytes at 0x0 (buffer addr : 0x7000378C)
-E- Can't send data (0x0000000f)
-I- === Load the u-boot in the next sectors ===
-I- Send File at91cap9adk-u-boot-nf.bin at address 0x00008000
GENERIC::SendFile at91cap9adk-u-boot-nf.bin at address 0x8000
-I- File size : 0x33934 byte(s)
-I- Writing: 0x10000 bytes at 0x8000 (buffer addr : 0x7000378C)
-E- Can't send data (0x0000000f)
-I- === Load the Kernel image ===
-I- Send File at91cap9adk-linux.bin at address 0x00040000
GENERIC::SendFile at91cap9adk-linux.bin at address 0x40000
-I- File size : 0x150800 byte(s)
-I- Writing: 0x10000 bytes at 0x40000 (buffer addr : 0x7000378C)
-E- Can't send data (0x0000000f)
-I- === Initialize the NAND access ===
-I- NANDFLASH::Init (trace level : 4)
-I- Loading applet isp-nandflash-at91cap9.bin at address 0x70000000
-E- Script File at91cap9adk-x11-nf.tcl returned error : Can't detect known device - Can't detect known device
while executing
"error "Can't detect known device""
(procedure "GENERIC::Init" line 45)
invoked from within
"GENERIC::Init $NANDFLASH::appletAddr $NANDFLASH::appletMailboxAddr $NANDFLASH::appletFileName [list $target(comType) $target(traceLevel)]"
(procedure "NANDFLASH::Init" line 10)
invoked from within
"NANDFLASH::Init"
(file "at91cap9adk-x11-nf.tcl" line 33)
invoked from within
"source $scriptFile"

Return to “SAM-BA”

Who is online

Users browsing this forum: No registered users and 1 guest