I've recently received my SAMA5D3 Xplained board.
It's running smoothely the linux demo that was initially falshed on the board.
Problems started to happen when I tried to send new images (obtained from linux4sam website, no recompilation on my side) on the board.
I follow the usual press reset button, keep it pressed, unplug NAND_CS jumper, release reset button and after a few seconds replug the jumper.
When using sam-ba on my linux VM, it's throwing one error for which I couldn't find any solutions.
Here's my commands:
Code: Select all
root@host:/opt/sam-ba_3.3.1# ./demo_linux_nandflash.sh Opening serial port 'ttyACM0' Connection opened. -I- === Initilize low level (system clocks) === /opt/sam-ba_3.3.1/qml/SAMBA/Applet.qml:247: Error: Could not initialize applet (status: undefined) Connection closed.
I also tried on the sam-ba client on windows with no luck also.
As I don't have a deep knwoledge of how these applets work on their side, I don't really know what's hapenning.
Does anyone have a solution?