Page 1 of 1

Modify SAM-BA2.6's monitor to program Nandflash

Posted: Fri Dec 12, 2008 5:33 am
by Cheng Shi
Hi, All

I try to modify SAM-BA2.6 to program AT91SAM9261S Rev-B based NandFlash. As AT91SAM9261S Rev-B only has 16KB SRAM, so I change addresses of buffers in monitor SAM-BA-nand.bin from SRAM to SDRAM. With the modified monitor, SAM-BA 2.6 can initialiaze Nandflash based on AT91SAM9261S Rev-A correctly, but it's failed to initialize Nandflash based on AT91SAM9261S Rev-B.

I't appreciated for any comments about this issue. Thanks in Advance.


Cheng Shi
Emtronix