SAMA5D27 WLSOM1 - Yocto Linux Help

Moderator: nferre

KrishNani
Posts: 2
Joined: Sat Jul 11, 2020 12:41 am

SAMA5D27 WLSOM1 - Yocto Linux Help

Sat Jul 11, 2020 12:51 am

Hi All.

I am trying to get the SAMA5D27 WLSOM1 EK1- rev3 board up with Yocto Linux - as per the steps provided in https://www.linux4sam.org/bin/view/Linu ... ctoProject

I ran into a few issues :

1. /proc/config.gz does not exist

Wasnt able to fix it - getting my hair grey trying to fix it.

Has anyone able to get the board up with Yocto Linux? if yes, could you share a manual that you followed? or if possible, the image file.

Thanks a lot
Nani
blue_z
Location: USA
Posts: 2101
Joined: Thu Apr 19, 2007 10:15 pm

Re: SAMA5D27 WLSOM1 - Yocto Linux Help

Sun Jul 12, 2020 11:35 pm

KrishNani wrote: I am trying to get the SAMA5D27 WLSOM1 EK1- rev3 board up with Yocto Linux - as per the steps provided in https://www.linux4sam.org/bin/view/Linu ... ctoProject
You are not clear as to what you are trying to do.
Using Yocto is not directly related to "getting a board up".

KrishNani wrote: I ran into a few issues :

1. /proc/config.gz does not exist
Wasnt able to fix it - getting my hair grey trying to fix it.
You claim that there are a "few issues", yet you only list one issue.
There is no context for that single issue.
What instructions are you trying to follow?
What are you trying to do?

KrishNani wrote: if yes, could you share a manual ...?
You mean something like this?

KrishNani wrote: or if possible, the image file.
You mean something like this?

Regards
KrishNani
Posts: 2
Joined: Sat Jul 11, 2020 12:41 am

Re: SAMA5D27 WLSOM1 - Yocto Linux Help

Mon Jul 13, 2020 5:30 pm

Hi blue_z

Thanks for your reply.

so what i was trying to do is to get Yocto linux on the board.

I used https://www.linux4sam.org/bin/view/Linu ... EKMainPage to build the environment.

My ultimate goal is to see if i can run Greengrass on this board.

AWS site mentions that they have tested this board with Greengrass running Yocto linux.

I hope this clarifies.

Thank you.

Return to “SAMA5-based”

Who is online

Users browsing this forum: No registered users and 3 guests