How to execute enable NandFlash option in SAM-BA 2.15?

Moderator: nferre

mukeshabdare
Posts: 1
Joined: Mon Jan 18, 2016 8:36 am

How to execute enable NandFlash option in SAM-BA 2.15?

Wed Jan 20, 2016 8:01 am

Hi,
I am trying to flash linux kernel on AT91SAM9261-EK which is a 32-bit microcontroller on Windows 7(64-bit).
The very first option of executing Enable NandFlash is missing in SAM-BA version 2.15. The available options are regarding DataFlash which doesn't fit the requirement. Is there any equivalent option which can enable the NandFlash??
(SAM_BA version 2.8 doesn't work with WIndows7(64-bit)).

I am able to flash the other files like:
nandflash_at91sam9261ek.bin
u-boot.binfie (burning uboot through SAM-BA)

I am facing problem while burning the image of third booting stage- kernel

After rebooting it gives an error of:
Big Data CRC ERROR-Can't get Kernel image.

Please help me in flashing the kernel in an appropriate manner.

Thanks!
blue_z
Location: USA
Posts: 2095
Joined: Thu Apr 19, 2007 10:15 pm

Re: How to execute enable NandFlash option in SAM-BA 2.15?

Thu Jan 21, 2016 2:52 am

mukeshabdare wrote:I am able to flash the other files like:
nandflash_at91sam9261ek.bin
u-boot.binfie (burning uboot through SAM-BA)
So how do you manage to write these files to NAND flash?
Did you perform the "enable NAND" step?

Regards

Return to “SAMA5-based”

Who is online

Users browsing this forum: No registered users and 1 guest