and the video at Micro Chip design center called "linux os for MPUS".
I followed these instructions using the file linux4sam-poky-sama5d27_som1_ek-6.0.img.bz2. The MD5 checksum matched the one listed on the page. I used Balena Etcher to create a boot card on a 64GB SDXC speed class 10 card. I repeated the attempt using a Lexar 64GB SDXC speed class 10 card in case the first card was bad and I got the same results. I also checked the card and the first sector is MBR. I read the MBR and the last two bytes are confirmed to be 0x55 0xAA.
After pressing reset with the SD card in slot J12 ( the full size slot) I get the following in my terminal
It seems to recognize my card as being an extended capacity card, and it recognizes my board. Does anyone have any thoughts on this error? Any help would be appreciated.
Code: Select all
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) random: fast init done random: crng init done
This message was redacted because the board was giving me guff about the message being spam due to contacts. I will add more detail later when I find out what the board is angry about.