Page 1 of 1

SAM-ICE pins

Posted: Sun Sep 20, 2009 3:06 am
by robbrad
Looking over the datasheets for the SAM7S128 and SAM-ICE, I noticed a few of the pin names don't match. I see nTRST, RESET on the SAM-ICE and NRST, JTAGSEL on the SAM7S. To what pins do the two SAM-ICE pins listed go on the SAM7?

Thanks

Re: SAM-ICE pins

Posted: Sun Sep 20, 2009 3:57 pm
by gerhardf
hello,
take a look at the schematic of the sam7s-ek (which is included in the user manual).

regards
gerhard

Re: SAM-ICE pins

Posted: Mon Sep 21, 2009 7:13 pm
by robbrad
I found a few schematics, but they don't show the relation of pin 1 to the plug. Pin 1 is on the end with the colored bar on the ribbon cable, but is it on the side of the JTAG plug with the bump or the flat side of the plug?