I ran into an issue where the colors in my Qt application have become swapped, where the color red is now blue and blue is now red when displayed on my LCD. This happened after upgrading buildroot-at91 to a newer branch. If I run the prebuilt Microchip planes demo on the newer buildroot the colors are displayed correctly, but when I debug my Qt application and run it on the same hardware the app's colors are swapped when displayed. If I debug my Qt application on the older buildroot-at91 branch the colors are correct. The older home automation demo displays the correct colors on the older buildroot-at91 branch too.
I have also tested the screen on the newer buildroot version with modetest and received the same color pattern displayed within the webpage (link below). So I am confident the hardware is working correctly. I don't know if I am missing a simple kernel or Qt5 config after the switch to the new buildroot-at91 branch.
If anyone has any information on a good place to start or know of a possible fix, your help is appreciated.
Newer Buildroot info
Buildroot-at91 branch 2020.02-at91
Older Buildroot info
Buildroot-at91 branch 2019.05-at91
24bit color depth
LCD Pattern Test
modetest - https://www.linux4sam.org/bin/view/Linu ... g_modetest
All design tool related questions: compiler, assembler, linker. Embedded programming questions: assembler, C code.
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest