Bootable USB mass storage device using at91sam3u

Discussion around product based on ARM Cortex M3 core.

Moderators: nferre, ncollot

Kalyani
Posts: 1
Joined: Wed Dec 07, 2011 1:43 pm

Bootable USB mass storage device using at91sam3u

Wed Dec 07, 2011 2:36 pm

Hi all,

We are developing a bootable USB mass storage device using AT91SAM3U controller.I am using ATMEL at91lib v1.9 as reference. I am able to boot different dell laptops and some of the dell desktops from the device.
But facing problem while booting with few models of desktop.The PC BIOS hangs for about 5 mins and then it shows the boot menu where the mass storage device is not listed.
The USB analyzer logs taken using TotalPhase Beagle 480 analyzer are attached for your reference from which we can observe that there is a periodic timeout after the SET CONFIGURATION command and the device is not responding to the INQUIRY command.

Any help would be appreciated.

Thanks,
Kalyani
Attachments
Logs.rar
callBackLog.xlsl -- is an .xls file format
Log1.tdc --- use total phase data centre to open the file which is free downloadable
(28.24 KiB) Downloaded 74 times

Return to “SAM3 Cortex-M3 MCU”

Who is online

Users browsing this forum: No registered users and 2 guests